Factory directly provide Spiral Wound Gasket-R Export to Armenia
Factory directly provide Spiral Wound Gasket-R Export to Armenia Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
Factory directly provide Spiral Wound Gasket-R Export to Armenia, The product will supply to all over the world, such as: , , ,
During the late 1950′s and early 1960′s fluoropolymer plastics were used primarily for their non-stick / low coefficient of friction or insulating properties. Primary applications ranged from paint additives to wire insulation, bearing plates, gaskets and even non-stick frying pans. Edlon saw far greater possibilities. It envisioned harnessing the unique properties of fluoropolymers for alleviating customer’s processing problems in the areas of: corrosion-resistance, release characteristics and in high purity applications.
Edlon was the first to develop a fusion welding process capable of joining long-length fluorinated ethylene propylene (FEP). Then it introduced non-stick covers bonded onto paper mill dryer rolls, which eliminated many of the common problems associated with paper production such as picking, sticking and corrosion. Edlon also developed the process of fabricating iso-statically molded pipe and fitting linings from polytetrafluoroethylene (PTFE). Edlon continues to offer innovation after innovation, and now has industrialized processes in a wide number of applications.
Today, Edlon has extensive capacities to process a wide range of fluoropolymers through a huge variety of manufacturing techniques. We are unmatched in our knowledge and abilities to deliver innovative solutions, and in our capabilities to solve our customer’s most challenging problems.
By from -
By from -
