Massive Selection for Spiral Wound Gasket-RIR Supply to Czech Republic

Short Description:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded. Feature Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse medi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Massive Selection for Spiral Wound Gasket-RIR Supply to Czech Republic Detail:

Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.

Feature

Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.

Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface

Easy installation and handy use.

Excellent Sealability

Products Type

hh

Technical Data Sheet

Product&Type

Size(mm)

Temperature(℃)

Pressure(Mpa)

Spiral Wound Gasket filled with Graphite

 

φ16~φ3200

(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃

(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa

Spiral Wound Gasket filled with Asbestos

 

φ16~φ3200

-150~+450℃

15

Spiral Wound Gasket filled with PTFE

 

φ16~φ3200

-200~+250℃

15

 Application Area

The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.


Product detail pictures:

Massive Selection for
 Spiral Wound Gasket-RIR Supply to Czech Republic detail pictures


Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications

Massive Selection for Spiral Wound Gasket-RIR Supply to Czech Republic, The product will supply to all over the world, such as: , , ,


  • The Linuo knife gate is an economical, high performance knife gate valve used in pulp and paper, refining, wastewater, water treatment, mining, and chemical fiber industries.

    It offers the following advanced features:

    1) A super thin body design and compact construction, providing easy installation.

    2) The seats movable design with a spring loaded O-ring serves to provide self-compensation to normal seat wear, resulting in long term service life. Excellent seal tightness is upheld throughout a prolonged life cycle. Metal seated, EPDM seated and PTFE seat designs are available for various process conditions.

    3) The disk bottom provides a knife shaped design with strong cutting force, particularly applicable for pulp media. The disk guide is hard chromium plated after a perfect surface grinding allowing high abrasion and corrosion resistance.

    4) PTFE guides insure tight gate to body contact with low friction and no damage to the gate. Small machined transitions at the port bottom prevent residue build-up and reduce downtime.

    5) A variety of port designs are available for various process conditions, such as 3 port, triangle port, hexagonal port, and others.

    6) The knife gate valve can be mounted with pneumatic and electric actuators control systems for used in automatic control systems in a variety of industries.


    5 Stars By from -

    5 Stars By from -

    Related Products