Low MOQ for Spiral Wound Gasket-RIR for Muscat Factory
Low MOQ for Spiral Wound Gasket-RIR for Muscat Factory Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
Product&Type |
Size(mm) |
Temperature(℃) |
Pressure(Mpa) |
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃;(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Low MOQ for Spiral Wound Gasket-RIR for Muscat Factory, The product will supply to all over the world, such as: , , ,
On this vehicle what may appear to be a leaking trans pan gasket could easily be an O ring at the electrical connector instead of the pan gasket. Here are the details
Ring Type Joint Flange is a method of ensuring leak proof flange connection at high pressures. A metal ring is compressed into a hexagonal groove on the face of the flange to make the seal. This jointing method can be employed on Weld Neck, Slip-on and Blind Flange.
Standards, Dimensions & Weight
Dimensions of Ring Joint Facings
Ring Joint Facings ASME/ANSI B16.5 & B16.47-1
Ring Joint Facings ASME/ANSI B16.5 & B16.47-2
Ring Joint Facings ASME/ANSI B16.5 & B16.47-3
Ring Joint Facings ASME/ANSI B16.5 & B16.47-4
Specifications:
Size: 1/2″ to 60″, DN 12mm to DN 1500mm
Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250
Facing: RF / RTJ
Material:
Cabon steel: A105, A350 LF2
Stainless steel: A182 F304/F304L/F316/F316L/F321
Alloy steel: F11, F12
Packing: plywood case and plywood pallet
We are manufacturer of Ring Type Joint Flange and supply high quality Ring Type Joint Flange in both large and small quantities worldwide and offer you the best prices in the market.
We have a team of experienced professionals with years of experience in manufacturing. (www.sunnysteel.com)
By from -
By from -