China wholesale FEP Encapsulated O-Ring to Mexico Factory
China wholesale FEP Encapsulated O-Ring to Mexico Factory Detail:
Encapsulated O Ring adopts special rubber resisting high temperature, F+ plastic and special engineering to compound this sealing product. It not only has low contraction permanent set functions of rubber O Ring, but also resistant heat, cold oil, friction, chemical corrusion and other performances. It can be used in all kind of dynamical seal and static seal widely, meanwhile can replace all traditional rubber and plastic O Ring.
Technical Data Sheet
|
Property |
Unit |
Result |
|||
|
A |
B |
C |
|||
|
Normal Conditions |
Hardness |
JIS Hs |
70~90 |
70~90 |
60~75 |
|
Elongations(min.) |
% |
60 |
60 |
80 |
|
|
Tensile Stress(min) |
Mpa |
16 |
16 |
16 |
|
|
Compressibility |
% |
50~60 |
50~60 |
60~75 |
|
|
Recovery |
% |
＞85 |
＞85 |
＞70 |
|
|
Permanentset |
% |
＜10 |
＜10 |
＜10 |
|
|
230°Cx24h hot air ageing |
Change of hardness(max) |
JIS Hs |
-5~+5 |
-5~+5 |
-5~+5 |
|
Change of Tensile Stress(max) |
% |
-15 |
-15 |
-15 |
|
|
Change of Elongation(max) |
% |
-20 |
-20 |
-20 |
|
|
Compression Permanentset |
175°Cx70h |
% |
≤20 |
≤20 |
≤20 |
|
Color |
|
|
Brown |
Black |
Red |
|
Applications |
Temperature Limited |
℃ |
-20~+250 |
-20~+200 |
-20~+200 |
|
Pressure Limited |
Mpa |
0~35 |
|||
|
Working Environment |
|
Strong Caustics, moderate acids, chlorine, gases, water, steam, hydrocarbons, hydrogen and aluminum fluoride except element fluorine and fusion sodium. |
|||
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
China wholesale FEP Encapsulated O-Ring to Mexico Factory, The product will supply to all over the world, such as: , , ,
The Pintail SP13, SP17 and SP21 connector ranges provide low-cost, dust and weathertight standard interconnection for industrial and marine data and power applications. Pintail connectors from In2Connect UK build an indoor/outdoor interconnect system that offers the performance and reliability of MIL threaded connectors at the cost of a commercial (COTS) product. The SP13 (front panel mounting hole size 13mm), SP17 (front panel mounting hole size 17mm) and SP21 (front panel mounting hole size 21mm) series of multi-pin, threaded coupling connectors will provide IP68 integrity when mated (“Ingress of water in quantities causing harmful effects shall not be possible when the product is continuously immersed in water under conditions which shall be agreed between the manufacturer and the user”) and will work reliably indoors, outdoors and in harsh UV and hostile wet environments. They are widely used for safe control and power connections between equipment where IP68 is critical, e.g. in instrumentation, process control, industrial machinery, automotive, marine and other applications like outdoor lights, LED lights and LED display walls, outdoor security cameras, etc.
Using a combination of dual O ring sealing, high temperature PPS inserts, grommets and compression nuts, all insulator and contact areas in these connectors are sealed against environmental elements. The dual “O” rings mean that the integral backshell can be easily removed to allow accurate soldering of the incoming cable. Constructed of glass filled nylon, flammability rated V-0 shells with 260 degrees C inserts these connectors have very stable dielectric and insulating properties plus they provide good mechanical properties at their design temperatures of -40 to 85 degrees C. They are RoHS compliant, CE approved, small, lightweight and extremely cost-effective when compared to their metal counterparts ~ without compromising the integrity of the interconnection. Pintail connectors are designed for at least 500 mating cycles and can accommodate cable diameters from 3 to 12mm.
watch solar panels and solar cells being made , a video by suntech,
By from -
By from -
