12 Years Factory wholesale FEP Encapsulated O-Ring to UK Manufacturer

Encapsulated O Ring adopts special rubber resisting high temperature, F+ plastic and special engineering to compound this sealing product. It not only has low contraction permanent set functions of rubber O Ring, but also resistant heat, cold oil, friction, chemical corrusion and other performances. It can be used in all kind of dynamical seal and static seal widely, meanwhile can replace all traditional rubber and plastic O Ring.

Technical Data Sheet

Co laminating machine (ILC-CEL130)

Mode: ILC-CEL130
Kind of web: Plastic films, aluminum foil
Web width: max 1200mm
Guide roll width: 1300mm
Machine speed: Max 200m/min
Working speed: Max 200m/min
Extruder motor: Main extrude: 75kW, co extruder: 55kW
Screw Diameter: Main extruder: 100 mm, Co extruder: 80mm
Extruder L/D: 32:1
Main Driving Motor: AC Vector Motor

INT KOREA Coating Machine (ILC-CO1700)

Mode: ILC-CO1700
Kind of web: Plastic films, aluminum foil
Web width: max 1600mm
Guide roll width: 1700mm
Machine speed: Max 200m/min
Working speed: Max 150m/min
Main Driving Motor: AC Vector Motor

INT KOREA COATING MACHINE (ILC-CO140)

INT COATING APPLICATION
 Comma Coating
 Direct Gravure Coating
 Reverse Gravure Coating
 Micro Gravure Coating
 Kiss Coating
 3 roll coating

Model: ILC-CO140
Kind of web: Paper, PET, Plastic Films
Web Width: Max 1300mm
Guide of Roll Width: 1400mm
Max Speed: Max 200m/min
Working Speed: Max 180m/min
Main Driving Motor: AC Vector Motor

INT KOREA COATING MACHINE (ILC-CO160-PS)
Model: ILC-CO160-PS
Kind of web: PET FILMS
Web Width: Max 1600mm
Guide of Roll Width: 1700mm
Max Speed: Max 60m/min
Working Speed: Max 50m/min
Main Driving Motor: AC Vector Motor

The Types 3271 and 3277 Pneumatic Actuators contain a rolling diaphragm and internal springs.

Special features
• Low overall height
• Powerful thrust at high response speed
• Low friction
• Various bench ranges by varying the number of springs or their compression
• No special tools required to change the bench range and to reverse the actuator action (also version with handwheel)
• Permissible operating temperatures from –50 to +120 °C
• Direct attachment of accessories on additional yoke for
• Type 3277 with concealed travel pick-off

Samson 3241 Globe Control Valve

The control valves consist of a body with trim, bonnet and pneumatic actuator, optionally with metal bellows or insulating extension. The valves may be also equipped with electric, electro-hydraulic, or hand-operated actuators, as well as control accessories and other instrumentation.

Application

Control valve for process engineering and plants with industrial requirements.
Nominal valve sizes 1⁄2” to 10” (15 to 250 mm) Pressure ratings ANSI Class 125 to 300
Temperatures −320 °F to +800 °F (−196 °C to +427 °C)

Features
• Modular design, rugged and heavy duty construction, full range of body and trim materials
• One-piece ultra-rigid valve bonnet and yoke up to size 6”
• Field retrofittable extension bonnets and metal bellows seals
• Many configurations, e.g. Cryogenic or ‘Lethal service’
• Self-adjusting, live-loaded PTFE V-ring stuffing box
• Port-guided V-port asymetric plugs above CV 20 standard
• Excellent dynamic response and high trim stability
• Self-locking seats, exchangeable for various CV values
• Low height, reversible, multi-spring/rolling diaphragm actuator
• NAMUR (IEC 534-6) accessory mounting standard
• Complete selection of actuators options, positioners and control accessories

Installing a SAMSON 3277 Actuator to a 2″ Samson 3241 Globe Control Valve

In this video, we’ll describe how to install a SAMSON 3277 actuator to a 2″ 3241 globe valve. The actuator in this example fails closed and is a size 350cm with a 3-15psi spring range.

Step by Step Instructions:

1. Begin by carefully placing the actuator onto the valve bonnet to avoid thread damage.

2. For this example we’re using a 3-15 psi actuator, apply approximately 20psi to retract the stem. This allows us to install the ring nut without causing any damage to the plug and seat sealing surfaces. Thread on the ring nut and lock into position.

3. To set the bench range, apply a pressure equal to the lower bench range; 3 psi in our case.

4. Push down on the plug to make sure it’s firmly pressed into the seat. Raise the stem connector nut until it makes contact with the actuator stem and add an additional ¼ turn. Then, raise the lock nut and secure into position with two wrenches.

5. The stem connector clamp is now installed to mechanically link the actuator stem to the plug.

6. If necessary, adjust the travel indicator to the correct position.

7. Actuator installation is now complete.

RENCOR Controls
21 Sullivan Parkway
Fort Edward, NY 12828
Phone: (800) 777- 4174
Fax: (518)747- 4176
www.rencor.com
rencor@rencor.com