OEM Customized wholesale Carbon Fiber Packing Impregnated with PTFE to Mauritius Importers

Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.

Technical Data Sheet

 Application Area

Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.

Re-install the drive shaft and jet pump.

Clean threads inside the bolt holes in the pump base and clean the bolt threads.

Grease the splines on both ends of the drive shaft, and the O-ring seal that fits into the impeller.

Make sure the pump section fully seats aginst the pump base, and the drive shaft fully engages the PTO drive coupler.

As you tighten the bolts, check that the nozzle assembly is square and level, not tilted. Snug the bolts, check for proper pump assembly.

Then torque to 18 ft-lbs in a criss-cross pattern.