High reputation for Carbon Fiber Packing Impregnated with PTFE to Belgium Manufacturer
High reputation for Carbon Fiber Packing Impregnated with PTFE to Belgium Manufacturer Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
High reputation for Carbon Fiber Packing Impregnated with PTFE to Belgium Manufacturer, The product will supply to all over the world, such as: , , ,
Toolguard is a high temperature, extruded silicone that provides protection to the mold and the operator during transportation and handling. Toolguard can be permanently bonded to the mold edge using RTV silicone adhesive. The product is available in two sizes that cover most mold edge thickness.
For more information, please visit: www.airtechonline.com
By from -
By from -
