factory customized PTFE Packing with Aramid Corner to Finland Factory
factory customized PTFE Packing with Aramid Corner to Finland Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
factory customized PTFE Packing with Aramid Corner to Finland Factory, The product will supply to all over the world, such as: , , ,
The Leg Band, made entirely of stretch material, has a soft, supple backing for added skin comfort. The elasticity and 2″ width of the leg band distribute compression evenly around the thigh to minimize circumferential pressure.
All Dale Hold-n-Place® Foley Catheter Holders feature patented locking systems that securely anchor the catheter in place, reducing the risk of urethral erosion, bladder spasms and trauma. The locking devices speed up application and simplify adjustment.
The holders can be used with equal effectiveness on all Foley catheters including Teflon, silver and silicone coated catheters. Latex-free.
In response to clinical concerns regarding patient hypersentivity, the Dale Foley Catheter Holders contain no latex.
By from -
By from -
