Factory Cheap Expanded PTFE Tape to Bulgaria Factories
Factory Cheap Expanded PTFE Tape to Bulgaria Factories Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
No.
|
Project |
Technical Indexes |
1 |
PH Range |
0-14 |
2 |
Density |
0.7-0.8g/cm3 |
3 |
Temperature resistance |
-260-+260℃ |
4 |
High pressure resistance |
20~25Mpa |
5 |
Elongation |
20~30% |
6 |
Tensile strength |
30~35Mpa |
Regular Size
NO. |
SIZE |
NO. |
SIZE |
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
Factory Cheap Expanded PTFE Tape to Bulgaria Factories, The product will supply to all over the world, such as: , , ,
For more info and related products click on the following link: https://mercedessource.com/tech-help/videos/mercedes-automatic-transmission-seal-diagnosis-part-2-new-seals-gaskets-and-o-rings
In this video Kent will show you the problems he found when resealing the transmission in his own 1986 300SDL. Applies to almost all models form 1968-1995 including late 111, 113, 108, 109 chassis cars all 114 and 115 chassis 220 230 250 250C 280 280C 240D 300D 1968 to 1976, 107 Chassis 350SL 450SL 450SLC 380SL 560SL 1972 to 1989, 116 chassis 350SE 450SE 450SEL 280SE 280SEL 300SD 1973 to 1980, 123 chassis 1977-1985 Models 230 240D 240TD 280E 280CE 300D 300CD 300TD, 126 chassis 380SE/L 300SD 500SE/L 300SDL 420SE/L 300SE/L 560SE/L 380SEC 560SEC 1981-1991, 201 Chassis 190E and 190D 1984 to 1993 and 124 Chassis 260E 300E 300D 300TD 300TE 300CE E320 and E300D 1986 to 1995 and 129 and 140 chassis to 1995.
These devices are installed in industry to safely and effectively transfer liquids or supply a Single stage centrifugal pumps & water page 1 single machines fluid …
By from -
By from -