Online Manufacturer for NBR O-Ring for Macedonia Factory
Online Manufacturer for NBR O-Ring for Macedonia Factory Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
Color | Black or Color |
Material | Nitrile(NBR) |
Hardness(Shore A) | 65~75 |
Temperature(℃) | -30~+120 |
Tensile Strength(Mpa) | 14 |
Elongation at Break(%) | 384 |
Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
Online Manufacturer for NBR O-Ring for Macedonia Factory, The product will supply to all over the world, such as: , , ,
Toolfusion® 3 is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite moulds. Toolfusion® 3 has a low initial cure temperature of 120ºF (49ºC) and can be post cured to achieve a high glass transition temperature of 425ºF (218ºC). Void contents of less than 1% are achievable. Toolfusion® 3 will work in various RTM and VARTM processes including single and double bag arrangements to produce autoclave quality laminates.
Benefits:
• Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration costs, no autoclave running costs.
• Low initial cure temperature for low thermal expansion effect during curing and ability to use low cost master model materials.
• Nano technology delivers outstanding toughness & high Tg. (218ºC) for long tool life and reduced life cycle cost.
• Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
• In comparison to metallic tools, Toolfusion® 3 composite tools are lighter weight for easier manual handing.
• In comparison to metallic tooling, Toolfusion® 3 composite tools have faster heat up and cool down rates for reduced production costs.
• Toolfusion® 3 composite tooling laminates have vacuum integrity for vacuum bag processing of parts in oven and autoclave.
For more information, please visit: www.airtechonline.com
By from -
By from -