OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory

Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.

Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.

Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.

l Easy use and replacement

l Wide service scope.

Technical Data Sheet

Regular Size

Application Area

It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.

CHECK OUT THE WEBSITE FOR THE NEW TOOL

www.icrimp.com.au

VISIT THE WEBSITE https://www.icrimp.com.au/ AND THE EBAY STORE https://stores.ebay.com.au/icrimpsystems

Worlds first copper & pex plumbing crimp press tool
The new iCrimp tool was designed to press crimp 1/2 and 3/4 copper and also 16-20-25-32 pex fittings. With 5 tons of manual crimping force in your hands you can be assured on every crimp every time. The icrimp tool weighs only 3.8kg and is capable of flame free connections to copper and pex press systems in under 5 seconds. Pressing copper eliminates the time consuming process of soldering and brazing. The icrimp press tool has constant axial pressing force, ensuring you consistent flame free connections all day long.
Key benefits
• All in one Copper and Pex hand multi-crimper
• Easy interchangeable dies, change effortlessly from different sizes and systems
• No batteries or AC power to worry about
• 360 degree head rotation for easy access
• Fully submersible tool for those wet jobs
• Press connections eliminate need for permits, oxy, torch, bottles etc
• Forged jaws press accurately without leaving burns
• Saves time and money on jobs
• Also does 18mm PB pipe
• Perfect for maintenance plumbing with all the different systems used on houses
• Sturdy and rigid construction
• 5 year product warranty

Savings $$$$
The average plumber in Australia spends approx $900 per year on GAS hire, silver solder, flux, map gas and in time/labor with brazing. Not to mention the hassle of carrying the big heavy bottles around on each job. That’s a 5 year cost of $4500. This multi-crimper cuts down your yearly costs, giving you back time and money.
Testing and Calibration
The tool has been tested to over 4000kpa on our approved pex and copper press systems so you can be confident that each join is 100% leak proof. Our multi tool is designed and engineered to be universally used and also eliminates the need to carry different tools for different systems. If you’re a 1 man plumbing business or employ multiple tradesman, you simply can’t do without the new iCrimp Press Tool. This tool will replace most of your old, heavy and expensive equipment and is at the forefront of plumbing industry technology and design.
Each tool is assembled and then individually calibrated at the iCrimp factory in Australia. We then test each tool to ensure it meets our strict quality control guidelines. This ensures that every tool that rolls out is capable of 5 ton of pressing force and is calibrated to Australian plumbing crimp fittings.
New Technology
The cutting edge technology of the iCrimp tool does away with large and expense jaws for each size piping, as used with current battery tool models. Now you simply change the inner working dies for each size tubing that you are working on. It’s that simple ! No need to spend thousands of dollars to get into the crimp market, iCrimp has designed the perfect maintenance / entry level press tool. Enjoy all the financial and business benefits this tool will do for your workplace. Save time and money on a daily basis.

More information on Copper and Pex press crimp systems
Copper
Press-connect joining of copper and copper alloy tube is fast, economical, and, most importantly, it requires no heat or open flame unlike soldering or brazing. The press-connect joining method (sometimes called press-fit) was patented in Europe in the late 1950s and continues to be used successfully there.
Press-connect joining takes advantage of copper’s excellent malleability and its proven increased strength when cold worked. The joints rely on the sealing capability of a special fitting that contains an elastomeric gasket or o-ring seal and the proper use of pressing tools and jaws. Several manufacturers offer full product lines of press-connect fittings, valves and specialty items. Our tool will crimp all watermarked copper press systems sold in Australia.
Kempress
Viega
BPress
Press Plus
and much more

Pex
PEX (or crosslinked polyethylene) is part of a water supply piping system that has several advantages over metal pipe (copper, iron, lead) or rigid plastic pipe (PVC, CPVC, ABS) systems. It is flexible, resistant to scale and chlorine, doesn’t corrode or develop pinholes, is faster to install than metal or rigid plastic, and has fewer connections and fittings.
PEX tubing is made from crosslinked HDPE (high density polyethylene) polymer.
Our tool will crimp a variety of industry standard copper ring pex crimp systems. As an added bonus, the 16mm pex die will also crimp all 18mm Poly Bute (pb) water piping. So if you come across 18mm (1/2′) Buteline or Profit in your work, you can also repair these. There is almost nothing this new tool cant do.
Some systems our tool has been tested on
Auspex
Duopex
Bush Crimp
K1
K2
Profit18
Buteline18
and much more, contact us for a complete pex system compatibility chart.

Watch as Landon Facco from Spartan Controls shows how to install a Fisher 657 Actuator onto a Fisher Sliding Stem Valve.

Spartan Controls is proud to represent several leading brands of valves and actuation technologies including Fisher Controls Valves. For more information visit us at www.spartancontrols.com.

Follow us on Twitter: @SpartanControls
Like us on Facebook: www.facebook.com/SpartanControls
Connect with us on LinkedIn: www.linkedin.com/company/spartan-controls

The images, information and materials presented in this video have been developed for general informational purposes only. The quality, accuracy or completeness of any information presented in this video is provided “as is” without warranty or condition of any kind. The information may be incomplete, and particular facts unique to your situation may render the information inapplicable or incorrect for your situation. Take all steps necessary to ascertain that information you receive is current, correct and applicable. Copyright © 2015 Spartan Controls Ltd. All rights reserved.