Hot-selling attractive Expanded PTFE Tape for New Orleans Factory
Hot-selling attractive Expanded PTFE Tape for New Orleans Factory Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
|
No.
|
Project |
Technical Indexes |
|
1 |
PH Range |
0-14 |
|
2 |
Density |
0.7-0.8g/cm3 |
|
3 |
Temperature resistance |
-260-+260℃ |
|
4 |
High pressure resistance |
20~25Mpa |
|
5 |
Elongation |
20~30% |
|
6 |
Tensile strength |
30~35Mpa |
Regular Size
|
NO. |
SIZE |
NO. |
SIZE |
|
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
|
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
|
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
|
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
|
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
|
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
|
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
|
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
|
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
|
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
|
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
|
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
|
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
|
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
Hot-selling attractive Expanded PTFE Tape for New Orleans Factory, The product will supply to all over the world, such as: , , ,
If your car’s A/C is low on refrigerant and blowing hot air, that means the system, by definition, has a leak somewhere. You can add more refrigerant, but that refrigerant won’t last unless you seal the leak.
Super Seal is the fast, easy, inexpensive way to seal small A/C leaks yourself. A single can seals leaks in both the metal and rubber components of the air conditioning system, without the expense of replacing parts.
Using Super Seal is simple:
1. Locate the low-pressure port on your car A/C system. For help in finding the port on your vehicle, visit our online port locator: https://bit.ly/R1npRR
2. Attach the hose to the Super Seal can.
3. Start the engine and set the A/C and fan to maximum.
4. Connect the hose coupler to the low-pressure port.
5. Dispense the can’s contents into the A/C system.
6. Add R-134a refrigerant to recharge the system.
7. Allow the air conditioner to run for 15 minutes to circulate the Super Seal throughout the system.
Have questions? Ask the pro: https://bit.ly/1e8xjep
R-134a Super Seal can be found on the shelves of most auto parts stores. To find the nearest location, type your zip code into our store locator: https://bit.ly/1qgX12n
By from -
By from -
