2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory
2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
2017 China New Design PTFE Packing with Aramid Corner to Czech Republic Factory, The product will supply to all over the world, such as: , , ,
See our blog for up to date Gun Rights reports and tell us what you think – https://selectivefire.blogspot.com/
We describe another method to economically and simply custom fit the bullet to your rifle bore to make your military surplus rifle shoot accurately. Using a two stage sizing process to create cheap bullets to keep you shooting.
****BE ALERT, LOADING CAN BE DANGEROUS, WE CANNOT BE RESPONSIBLE FOR ANY ERRORS ON YOUR PART. SEEK OUT SOMEONE COMPETENT IF YOU DON’T FEEL CONFIDENT IN YOUR ABILITIES***
By from -
By from -
