Wholesale PriceList for PTFE Graphite Packing with Aramid Corner Wholesale to Sri Lanka
Wholesale PriceList for PTFE Graphite Packing with Aramid Corner Wholesale to Sri Lanka Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
Wholesale PriceList for PTFE Graphite Packing with Aramid Corner Wholesale to Sri Lanka, The product will supply to all over the world, such as: , , ,
Prepping your intake manifold surface to insure no manifold vacuum leaks or coolant leaks. This is before actual cleaning of the manifold.
The 3 X Factor – Three Exclusive Features
V-Seal
Rotex V-SealSelf Energized: Exclusive self energized double lip seal design for superior dynamic sealing. V-Seal operates over a broad range of instrument air pressures. Lower friction and less hysteresis for control applications.
Wear Compensating: V-Seals’ wear compensation feature eliminates the “set” taken by traditional O-rings. Greater temperature range and chemical resistance than O-rings. Actuator seal selection made simple!
Seamless Bearings
Rotex Seamless BearingTop Pinion Bearing: Rotex Infinity has a large solid top bearing to center and align the pinion for years of trouble free service and performance. Traditional “strip” bearings or O-rings offer less surface area and load capacity, reducing the overall life of the actuator.
Seamless Piston Head Bearings: Bearings are large one piece construction to support and guide the pistons under maximum load conditions. Bearings are molded directly to the piston, then machined concentric to the piston, centering the piston more precisely than strip bearings or O-rings possibly could.
Rack Engagement Bearings
Rotex Rack Engagement BearingsCenter Bore Sleeve: Provides the largest single piece bearings surface possible for complete piston rack support.
Internal Rack Guides: Durable guide blocks optimize rack teeth engagement for a lifetime of actuator cycles.
By from -
By from -
