OEM/ODM China Spiral Wound Gasket-CGI for Mongolia Importers
OEM/ODM China Spiral Wound Gasket-CGI for Mongolia Importers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
OEM/ODM China Spiral Wound Gasket-CGI for Mongolia Importers, The product will supply to all over the world, such as: , , ,
Quickly and easily change an I bar sealing wire! Each I bar sealer comes with two replacement sealing wires and two sets of replacement Teflon tape strips. Use this video for instructions on how to change a sealing wire for your I bar sealer. Wire replacement should take 10-15 minutes and each wire should last for several thousands of seals with the proper temperature settings. Call us (1-800-441-5090) if you have any questions or order an I Bar shrink wrap machine at: https://www.uspackagingandwrapping.com/Shrink-Wrap-Machines/I-Bar-Sealers/
Rebuilding a top end for a 1976 honda cb550… includes removal and installation, gaskets, rings, etc
By from -
By from -
