High reputation for PTFE Graphite Packing with Aramid Corner for Brunei Manufacturers
High reputation for PTFE Graphite Packing with Aramid Corner for Brunei Manufacturers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
High reputation for PTFE Graphite Packing with Aramid Corner for Brunei Manufacturers, The product will supply to all over the world, such as: , , ,
CM, CME 1, 3, 5, 10, 15, 25 (cast iron)
Table of contents:
00:00 Dismantling of chamber stack
01:57 Removal of shaft seal
03:20 Fitting of shaft seal and gasket
04:38 Fitting the chamber stack
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html
demonstrating how to install GRAPHALLOY(r), graphite/metal alloy, bearings in metal housings. For more information go to www.graphalloy.com and for the complete video visit www.graphalloy.com/installation
By from -
By from -
