OEM Supplier for Serrated Gasket to Comoros Factories
OEM Supplier for Serrated Gasket to Comoros Factories Detail:
1.Structure
Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.
2.Characteristic
Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.
3.Gasket Typ
Basic Type With outer Ring
4. Working Environment
Working Temperature：~650℃
Working Pressure：6.4-16.0MP
Min. Pre-tightening：y=70MPa
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
OEM Supplier for Serrated Gasket to Comoros Factories, The product will supply to all over the world, such as: , , ,
https://www.classicfilters.com/product/ptfe-membrane-housings/ •
One of our most innovative filtration solutions, Classic Filters’ hydrophobic PTFE membranes and housings are perfectly suited for separating liquid from gas molecules, allowing a pure gas sample to be produced for the protection of analysers and other instruments.
A porous PTFE membrane is supported by a sintered, porous stainless steel disc on the outlet side to increase the strength of the membrane and give a higher differential pressure. Two liquid phases can also be separated if required.
Classic Filters now also offers a new hydrophobic/oleophobic membrane, designed to remove both water and oils from a gas stream.
Permalink: https://youtu.be/Ve6oXIACT4w
By from -
By from -
