Manufacturer for Carbon Fiber Packing Impregnated with PTFE to Comoros Importers
Manufacturer for Carbon Fiber Packing Impregnated with PTFE to Comoros Importers Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Manufacturer for Carbon Fiber Packing Impregnated with PTFE to Comoros Importers, The product will supply to all over the world, such as: , , ,
GASKET JOINT KIT includes
2 Lower Plinum Manifold Paper Gasket
1 upper Plenum Manifold Paper Gasket
1 Oil Pump to Block Paper Gasket
1 IACV or Idle Control Valve Paper Gasket
1 EGR Actuator Valve Paper Gasket
1 Throttle Body Paper Gasket
2 Metal O-ring Composit Head Gasket
2 Aluminize Exhaust Manifold Gasket
2 Synthetic Rubber Valve Rocker Cover Joint Seal
2 Synthetic Rubber Camshaft Lip-Seal
1 Crankshaft Front Main Lip-Seal
1 Crankshaft Rear Main Lip-Seal
12 Engine polyarcrylate Valve Seal Stem Seal
2 Front Oil Pan Seal
6 Complete set of Fuel Injector O-Ring Seal and Joints
By from -
By from -
