China Manufacturer for PTFE Graphite Packing with Aramid Corner Export to Mali

Short Description:

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency. Technical Data Sheet   Rotating Reciprocating Valves Pressure 4Mpa 15Mpa 25Mpa Shaft Speed 20m/s rotary Temperature -200℃~+280℃ PH Range 2~12  Application Area It affords longer service life under severe conditions which conventional...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
China Manufacturer for PTFE Graphite Packing with Aramid Corner Export to Mali Detail:

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

4Mpa

15Mpa

25Mpa

Shaft Speed

20m/s rotary

Temperature

-200℃~+280℃

PH Range

2~12

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.


Product detail pictures:

China Manufacturer for
 PTFE Graphite Packing with Aramid Corner Export to Mali detail pictures


Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket

China Manufacturer for PTFE Graphite Packing with Aramid Corner Export to Mali, The product will supply to all over the world, such as: , , ,


  • Leaking pipes due to galvanic corrosion is a very common phenomenon on almost every vessel.

    Repairs with Wencon Pipe Tape require no tools. Besides the pipe bandage the package also contains protective gloves and plastic bags for water. If the pipe can not be emptied or when high pressure repairs are required, Wencon Putty can be used to stop the leakage and reinforce the repair.

    Facts about Wencon Pipe Tape:

    Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.

    Wencon Pipe Tape is a pre impregnated fibreglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour.

    Facts:
    - The instant repair bandage for leaking pipes
    - Quick and effective to use
    - No mixing No tools
    - Water activated
    - Ready for use in 10 seconds Cures in 10 minutes
    - Suitable for all pipes and surfaces

    For more information – visit www.wencon.com.

    Thanks to www.danosongs.com for the backgorund music!


    5 Stars By from -

    5 Stars By from -

    Related Products