Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
Best quality and factory PTFE Graphite Packing with Aramid Corner Supply to Qatar, The product will supply to all over the world, such as: , , ,
Toolwright 3 is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. Toolwright 3 has a thinner film than Toolwright 5 version and can be more easily applied over complex contour surfaces. Toolwright 3 has high elongation, good tear strength, high temperature resistance and excellent clean up after removal. Note: The color has changed to orange.
Benefits:
• Extend the life of worn tools avoiding cost of new tools.
• Tougher film is more tear resistant, easier and faster to apply.
• Improved part surface quality.
For more information, please visit: www.airtechonline.com
MH-02 Horizontal Winding Machine, makes 300mm up to 3500mm spiral wound gasket, both inner ring and the one w/o inner ring. Main configuration include, automatic welder, strip former, filler detector, strip forming assistant, flange width measuraing, PLC controlled programm, allow you make perfect flate large sizes of gaskets.
By from -
By from -