Top Suppliers PTFE Packing with Aramid Corner for South Korea Manufacturer
Top Suppliers PTFE Packing with Aramid Corner for South Korea Manufacturer Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
Top Suppliers PTFE Packing with Aramid Corner for South Korea Manufacturer, The product will supply to all over the world, such as: , , ,
In-depth video on how to replace an obsolete sprinkler manifold and valves with a new manifold and valves. Manifold is installed in a sprinkler system with Poly …
https://www.sealmaster.com
At Seal Master we take pride in our products and stand by their quality. Each Seal Master product is inspected a minimum of two times prior to shipment by two separate Seal Master Quality inspectors. During this process inspectors are looking for obvious cosmetic defects but are also trained to be aware of other problems that may occur during operation. Below are examples of some inspection processes that take place prior to shipment.
By from -
By from -
