Factory Cheap price Serrated Gasket for Munich Manufacturers

1.Structure

Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.

The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.

2.Characteristic

Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.

3.Gasket Typ

   Basic Type                                        With outer Ring

4. Working Environment

Working Temperature：~650℃

Working Pressure：6.4-16.0MP

Min. Pre-tightening：y=70MPa

Feature

Operating is easy .More Balance shaft and accessory shaft ,Let slitting tape is very trim .

Good pressing shaft avoid tape is break on machine working

The automatic tape machine applies a double-sided, self-adhesive tape on tubes for (roller) blinds. Positional control allows the distance between the tube end and the tape to be specified precisely at both ends in order to match the tape position with the fabric width and position. This prevents pollution at the tube ends caused by exposed tape.
The tube taping machine can be made compatible with multiple tube diameters, and switching between the diameters is very simple. The tube tape machine featured in the video is suitable for different tape widths, and uses a jumbo tape roll dispenser. The machine includes a feeding tray for tubes, and a collection crate in which the tubes are ejected. The operator sets the system to the correct tube diameter and only needs to place the tubes in the loading system. During transport, the tubes are de-greased using a solvent dispenser and wiping system, followed by the actual application of the tape. Transport, cleaning, taping and ejecting are done fully automatic.