High Quality Industrial Factory PTFE Graphite Packing with Aramid Corner to Auckland Importers
High Quality Industrial Factory PTFE Graphite Packing with Aramid Corner to Auckland Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
4Mpa |
15Mpa |
25Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
High Quality Industrial Factory PTFE Graphite Packing with Aramid Corner to Auckland Importers, The product will supply to all over the world, such as: , , ,
ALL SEALS – THE SEALING SPECIALISTS
Full-line stocking distributor for standard & ready source for non-standard seals & make-to-print rubber parts. Distributor of O-rings, Minnesota quad rings, hydraulic seals, U-cups, piston cups, vee packings, wipers, lathe cuts, Teflon® products, Teflon® spring loaded & Teflon® oil seals, mechanical shaft seals, gaskets, braided packings, bearing guards, sealants, adhesives, lubricants, silicone fluids & greases, RTV’s, UV curing equipment, adhesives & coatings, dispensing equipment & a wide variety of other products in metric sizes. Technical & application assistance is available.
For more technical information, visit our web site at https://www.allsealsinc.com.
Tell us what you want to seal, what conditions and specifications you need to meet, provide us with a print and we’ll custom design the part to meet your specs.
By from -
By from -