High Performance Tellerette Packing Ring for Palestine Importers

Material: PE, PP, RPP, PVC, CPVC and PVDF. Tellerette Packing Rings have features such as high void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific weight, high mass transfer efficiency, etc., and the application temperature in media ranges from 60℃ to 150 ℃.For these reasons, them are widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.

Technical Data Sheet

CM, CME (MG, MGE 71, 80, 90, 100 and 132)

Table of contents:

Dismantling:
00:00 Removing the motor flange
01:11 Removing the diverting disc, o-ring and bearing cover plate
01:33 Removing fan cover, fan and the seal ring
02:24 Removing the rotor

Assembly:
02:55 Fitting the rotor
03:09 Fitting fan cover, fan and the seal ring
04:38 Fitting the diverting disc, o-ring and bearing cover plate
04:58 Fitting the motor flange

Recorded: July 2009

For more information please visit:

https://www.grundfos.com/service-support.html

One-part polyurethane gun grade dual purpose adhesive and sealing compound with permanent elasticity. Once extruded, it cures by reaction to the atmospheric moisture to form a high performance and fast curing adhesive sealant. •Fast cure. •Over-paintable. •Can be easily smoothed and levelled out. •Non-corrosive. •Extremely versatile product with a good adhesion on many surfaces. •Good weathering and water resistance.
Application: SOMAFIX PU Sealant Multi Purpose Construction & Automotive is a powerful and versatile adhesive sealant for all jobs involving sealing & bonding (for a wide variety of materials including all cement based materials, brick, ceramics, glass, metals, wood, enamelled substrates, polyester, acrylic resin, plastics): wood, metal or plastic window and door frames, roofing, gaskets and coverings, flexible draught proofing, fixing of lightweight construction materials, containers, tanks and silos.
Directions for Use: •Make sure the surface to be applied is dry and clean, free of dust and grease. Stick both sides of surface with tapes. •Cut the cartridge tip and place it in the gun. •Cut the cannula tip and insert into the cartridge. •Apply the mastic and remove tapes. •Protect against water for 24 hours after application.
Safety: Keep away from reach of children. Avoid contact with eyes. Prolonged exposure to vapors may harm respiratory system. Store in a cool and dry place.