High Performance Reinforced PTFE Gasket for Cannes Manufacturer
High Performance Reinforced PTFE Gasket for Cannes Manufacturer Detail:
Modified PTFE gaskets improved performance over conventional PTFE, Reduced product loss and emissions. Excellent bolt torque retention, unique manufacturing process minimizes cold flow problems typical of skived and expanded PTFE Sheets. Withstands a wide range of chemicals for extended service life in a wide variety of applications.
Technical Data Sheet
|
Property |
Unit |
Standard |
|
Color |
|
Blue |
|
Composition |
|
PTFE with glassfiber |
|
Temperature Range |
℃ |
-268~+260 |
|
Pressure |
bar |
55 |
|
Sealability (GB/T9129-2003) |
cm3/s |
< 1 x 10-3 |
|
Creep Relaxation ASTM F38 |
% |
35 |
|
Compressibility Range ASTM F36-99 |
% |
25~40 |
|
Recovery ASTM F36-99 |
% |
>25 |
|
Tensile Strength ASTMF 152-95 |
N/mm2 |
12 |
|
Flammability |
Will not support flame |
|
|
Bacterial Growth |
Will not support |
|
Application Area
It can be used for mechanical seal, chemical anticorrosion, chemical process vessel seal, machine tool guideways lubrication, bridge construction support slider and various kinds of pipe sealing in high temperature and high corrosive condition.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
O-Ring Sizes for Industrial Applications
High Performance Reinforced PTFE Gasket for Cannes Manufacturer, The product will supply to all over the world, such as: , , ,
Toolfusion® 3 is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite moulds. Toolfusion® 3 has a low initial cure temperature of 120ºF (49ºC) and can be post cured to achieve a high glass transition temperature of 425ºF (218ºC). Void contents of less than 1% are achievable. Toolfusion® 3 will work in various RTM and VARTM processes including single and double bag arrangements to produce autoclave quality laminates.
Benefits:
• Resin infusion process delivers very high quality laminates with low manufacturing costs, no refrigeration costs, no autoclave running costs.
• Low initial cure temperature for low thermal expansion effect during curing and ability to use low cost master model materials.
• Nano technology delivers outstanding toughness & high Tg. (218ºC) for long tool life and reduced life cycle cost.
• Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
• In comparison to metallic tools, Toolfusion® 3 composite tools are lighter weight for easier manual handing.
• In comparison to metallic tooling, Toolfusion® 3 composite tools have faster heat up and cool down rates for reduced production costs.
• Toolfusion® 3 composite tooling laminates have vacuum integrity for vacuum bag processing of parts in oven and autoclave.
For more information, please visit: www.airtechonline.com
By from -
By from -
