High Efficiency Factory PTFE Gasket Wholesale to Morocco

Short Description:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material. Technical Data Sheet Property Unit Result Density g/cm3 2.18 Elongation at Break % 200~450 Tensile Strength Mpa 14~18 Bending Strength Mpa No Break Pressure Resistance Mpa 24 Tensile Modulus Mpa 393 Bending Modulus ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
High Efficiency Factory PTFE Gasket Wholesale to Morocco Detail:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.

Technical Data Sheet

Property Unit Result
Density g/cm3 2.18
Elongation at Break % 200~450
Tensile Strength Mpa 14~18
Bending Strength Mpa No Break
Pressure Resistance Mpa 24
Tensile Modulus Mpa 393
Bending Modulus Mpa 490~586
Working Temperature

(20000 hr, highest)

260

Application Area

As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.


Product detail pictures:

High Efficiency Factory
 PTFE Gasket Wholesale to Morocco detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials

High Efficiency Factory PTFE Gasket Wholesale to Morocco, The product will supply to all over the world, such as: , , ,


  • Hinged Pipe Repair Clamp S size 290.0mm to suit the outside diameter pipe of 290mm. The hinged pipe repair clamp by ORBIT COUPLINGS in Australia is manufactured from 316 stainless steel with teflon coated stainless steel bolts. EPDM Sleeve/ Seal rated to 16 Bar / PN16 / 1600 KPa. The hinged repair clamp is an easy and simple to install pipe repair clamp which opens on a hinge, allowing the clamp to fully open and wrap around the pipe that you are wanting to repair. Simply fit the clamp over the crack or hole in the pipe, and tighten the bolts to the torque stated on the pipe clamp. The hinged repair clamp is available in sizes up to 350mm nominal bore. Above size 350mm then we recommend the Double Lock Clamp by ORBIT COUPLINGS.
    For more information on pipe couplings and pipe repair clamps in Australia visit https://orbitcouplings.com.au/


    5 Stars By from -

    5 Stars By from -

    Related Products