Short Lead Time for PTFE Braided Gland Packing for Egypt Factory
Short Lead Time for PTFE Braided Gland Packing for Egypt Factory Detail:
Braided with 100% expanded PTFE, soft character, super fiber strength, ideal abrasion resistant material.
Special porous structure of the fiber can better absorb and reserve lubrication and heat conductive agent useful for the sealing of packing to assure of consistency of lubrication and heat conductive agent, great reduction of possibility of efficacy loss. Much better meets demands of rigid using conditions.
With the exception of very few chemicals, resists almost medium.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
2Mpa |
15Mpa |
20Mpa |
|
Shaft Speed |
10m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
It is particularly recommended for sugar and chocolate processing, and fine paper production.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Short Lead Time for PTFE Braided Gland Packing for Egypt Factory, The product will supply to all over the world, such as: , , ,
I am just finishing installing the water pump in my friends 2010 Yamaha R1. It was leaking water out of the weap hole they built in them that leaks from the middle of the oil pan if you can believe that. Its just a two piece oil seal in the water pump that goes bad just behind the impeller. Ill add the Yamaha Part numbers later when I have more time as well as add the rest of the videos of the removal and earlier install
By from -
By from -
