Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin
Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
A Look at the Molded Gasket
Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin, The product will supply to all over the world, such as: , , ,
Available to buy at: https://www.tradecounterdirect.com/sea…
Henkel Loctite 55 Pipe Sealing Cord is a new, faster, more versatile pipe sealant which out-dates traditional tapes and hemp/pastes combinations.
Impregnated with paste to give a high pressure seal to your joints. Loctite 55 should be wound a few times around the thread and once the joint has been closed tightly, will withstand pressures in the region of 40 bar.
Use for cold and hot water applications, as well as potable water or gas. Use on copper, steal or plastic pipe systems.
Loctite 55 is resistant to:
Hot and cold drinking water
Hot water
Domestic gas
Natural Gas
Liquefied gas in gaseous state
Gas condensates
Compressed air
Industrial oils (contains silicone oil.)
Not suitable for heating oil or fuels – Use instead Loctite 577.
Complies with EN 751-2 and has DVGW approval. Certifies to ANSI/ NSF Standard 61
By from -
By from -
