13 Years Manufacturer PTFE Graphite Packing with Aramid Corner to Malawi Manufacturer

PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.

Technical Data Sheet

 Application Area

It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.

Three Layer Blown Film Machine
Features:
• Horizontal Oscillating Haul off with PLC control.
• Teflon Rolls, Remote control motorized open/close, up/down Bubble Cage
• Bimetallic barrel with replaceable groove section and cooling jacket
• Melt pressure, temperature probes and display Include rupture disk
• 450mm A/B/C three layer IBC Ready Die and Air Ring
• Automatic Magazine winding shaft loading , Back-to-Back Surface Winder
• with loadcell and PLC control and slitting and edge open knives.
Optional devices:
• IBC & automatic width control and Blower
• Chiller and Chill Air Box for IBC and Air Ring
• Gravimetric blender dosing system
• Yield control management system
• Thickness measurement system
• BF-A A-frame thickness measurement system
• BF-E edge thickness measurement system
• BF-S scanner thickness measurement system
• Automatic Profile thickness control Air Ring
• PIB Gear Pumps

Avita Machinery Co., Ltd.
www.avitaplas.com
service@avitaplas.com

READ this !!! sorry about the audio ….attn:will not work on multiple grill or screen intake AKA Volute screen intake you need the same intake you see on the video.this pump is 750watts if you run 24/7 you go broke but any way i already bought small one @ebay 150watts and run like almost the same …. male adapter,valve from home depot, bigger sump pump handles more water more air can produce…
“NEW INVENTION” 3 in 1 water circulation, aeration/oxygen,protein skimmer my next project ….

…………….why mine not sucking air?………………..
problem:
a…you drill to big for tube connection / water still passing through…
fixed:
b… use teflon tape / silicon around the bolt thread
problem:
a…you drill to close to water outtake
fixed:
b…check the propeller turns / opposite side

multiple grills intake –not going to work..period