Short Lead Time for PTFE Packing with Aramid Corner Supply to Johor
Short Lead Time for PTFE Packing with Aramid Corner Supply to Johor Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Useful Tips For Installing The Teflon Envelope Gasket
Short Lead Time for PTFE Packing with Aramid Corner Supply to Johor, The product will supply to all over the world, such as: , , ,
This is a video preview for one of many online courses for continuing education credit we offer at www.handlab.com
This 1.5 hour lecture with demonstration video of orthosis construction steps allows you to solve the challenge of making an orthosis to stabilize all MP joints in extension while allowing full IP joint flexion. Learn a systematic approach to pattern making, positioning, and molding to construct an effective orthosis which elongates both the interosseous and lumbrical muscles. This course is the last part of six lectures that are intended to be viewed in sequence.
By from -
By from -
