Factory wholesale price for Spiral Wound Gasket-CGI for Borussia Dortmund Factory
Factory wholesale price for Spiral Wound Gasket-CGI for Borussia Dortmund Factory Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Useful Tips For Installing The Teflon Envelope Gasket
Factory wholesale price for Spiral Wound Gasket-CGI for Borussia Dortmund Factory, The product will supply to all over the world, such as: , , ,
Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.
If your water heater’s drain valve is leaking, or doesn’t allow a good water flow while flushing the tank, it’s time to replace the valve. This is a relatively easy job you can do yourself in about 30 minutes.
This video shows detailed step-by-step procedure for how to replace a drain valve on a gas or electric hot water heater.
Tools you’ll need
Replacement drain valve
Adjustable wrench
Pipe sealer or Teflon tape
Rags or towels
WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.
By from -
By from -
