Factory provide nice price PTFE Filament Braided Packing for Jordan Factories
Factory provide nice price PTFE Filament Braided Packing for Jordan Factories Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
12m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?
Factory provide nice price PTFE Filament Braided Packing for Jordan Factories, The product will supply to all over the world, such as: , , ,
PET strappng seal machine with LOGO can be carved on it
More at the pack-strap-machine.com
contact Mr Colin
Skype: mrcolinwang
Email: zjaska@vip.163.com
Mobile: (0086)18621090767,13918231595
Re-install the drive shaft and jet pump.
Clean threads inside the bolt holes in the pump base and clean the bolt threads.
Grease the splines on both ends of the drive shaft, and the O-ring seal that fits into the impeller.
Make sure the pump section fully seats aginst the pump base, and the drive shaft fully engages the PTO drive coupler.
As you tighten the bolts, check that the nozzle assembly is square and level, not tilted. Snug the bolts, check for proper pump assembly.
Then torque to 18 ft-lbs in a criss-cross pattern.
By from -
By from -
