factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer
factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Useful Tips For Installing The Teflon Envelope Gasket
factory Outlets for PTFE Packing with Aramid Corner to Greenland Manufacturer, The product will supply to all over the world, such as: , , ,
LIQUI MOLY Pro-Line Engine Flush (#2427)
Cleans the engine from the inside. Removes deposits from lubrication holes, oil screens, piston ring zone, etc. Reduces engine noise and oil consumption. Improves compression. Increases vehicle’s reliability. Allows the fresh oil to develop its full performance after an oil change.
Intended use:
Suitable for all petrol and diesel engines with and without diesel particulate filter (DPF). Tested safe with catalytic converters and turbochargers. Motor cleaning before an oil change. 500 ml sufficient for up to 5 l oil volume.
More information: https://www.liqui-moly.de/liquimoly/produktdb.nsf/id/en_2427.html?OpenDocument&land=GB&voilalang=e&voiladb=web.nsf
A TA Tech Tip on how to lubricate the Stirrer O-Rings on your RH-Perfusion and ITC Ampoules for your TAM.
By from -
By from -
