Factory Supplier for PTFE Packing with Aramid Corner for Mozambique Manufacturers
Factory Supplier for PTFE Packing with Aramid Corner for Mozambique Manufacturers Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
Factory Supplier for PTFE Packing with Aramid Corner for Mozambique Manufacturers, The product will supply to all over the world, such as: , , ,
CR, CRN 32, 45, 64, 90
Table of contents:
Assembly:
00:00 Pump base
02:26 Bearing on shaft
03:31 Chamber stack
08:09 Pump head
09:54 Basic unit
12:16 Shaft seal
13:47 Motor stool
15:33 Coupling
Replacement:
16:42 Neck ring
18:19 Bush
19:19 Impeller ware ring
20:05 Bottom bearing
Recorded: Before 2000
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
