Factory directly sale Aflas O-Ring to Chile Manufacturer
Factory directly sale Aflas O-Ring to Chile Manufacturer Detail:
Aflas based synthetic rubber, reinforced with carbon black and peroxide cured. Has good rapid gas decompression(FGD) resistant properties, which making it suitable for many high pressure gas applications. Temperature capability for this type compound is +5~+200℃.
Technical Data Sheet
| Properties | Units | Typical value |
| Hardness | IRHD | 84 |
| Tensile strength | MPa | 22 |
| Elongation at break | % | 189 |
| Modulus at50% elongation | MPa | 4 |
| Modulus at100% elongation | MPa | 12 |
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?
Factory directly sale Aflas O-Ring to Chile Manufacturer, The product will supply to all over the world, such as: , , ,
Re-install the drive shaft and jet pump.
Clean threads inside the bolt holes in the pump base and clean the bolt threads.
Grease the splines on both ends of the drive shaft, and the O-ring seal that fits into the impeller.
Make sure the pump section fully seats aginst the pump base, and the drive shaft fully engages the PTO drive coupler.
As you tighten the bolts, check that the nozzle assembly is square and level, not tilted. Snug the bolts, check for proper pump assembly.
Then torque to 18 ft-lbs in a criss-cross pattern.
By from -
By from -
