Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras
Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
A Look at the Molded Gasket
Customized Supplier for PTFE Graphite Packing with Aramid Corner Supply to Honduras, The product will supply to all over the world, such as: , , ,
https://www.BobsPlumbingVideos.com
In this video I go over the steps in replacing Delta style stems and seats. When these showed up in the market place they were marketed as “washer-less faucets”. Well they don’t have your typical flat or beveled washer held in place by a bib screw but the little cup down inside the recess is rubber and it sits up against the bottom stainless steel seat of the stem, WASHER-LESS? You decide!
For more about the tools and gear I use in these videos and in my plumbing business, head on over to the gear store at-https://www.bpvgear.com
Happy Plumbing
Bob
By from -
By from -
