Short Lead Time for PTFE Gasket to South Africa Manufacturers
Short Lead Time for PTFE Gasket to South Africa Manufacturers Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.18 |
| Elongation at Break | % | 200~450 |
| Tensile Strength | Mpa | 14~18 |
| Bending Strength | Mpa | No Break |
| Pressure Resistance | Mpa | 24 |
| Tensile Modulus | Mpa | 393 |
| Bending Modulus | Mpa | 490~586 |
| Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
What Is A PTFE Ring Gasket?
Short Lead Time for PTFE Gasket to South Africa Manufacturers, The product will supply to all over the world, such as: , , ,
Vetaphone and Coating Plasma Industrie demonstrates the EASI-Plasma system for surface treatment of films and foils.
Vetaphone’s EASI-Plasma system works on the same principles as a Corona system, but by replacing the oxygen with gases or monomers, the EASI-Plasma can create new and innovative abilities on the film surface. The EASI-Plasma system does this with a significantly lower amount of consumables than any other solution on the market.
Benefits of EASI-Plasma
• Higher and longer lasting dyne values
• Replace your primer or coating unit with a cheaper solution
• Nano-coating thickness only 5-50 nm
• Anti-fog
• Hydrophilic or Hydrophobic surface
• A large variety of other abilities
EASI-Plasma provides a wide range of benefits for the coating and converting processes; such as nano-coating, anti-fog properties, low surface ageing and higher dyne levels.
EASI-Plasma reduces production costs by eliminating the need to use expensive primer, so the cost per m2 is reduced significantly. As the layer of primer is not needed, it is possible to produce much thinner film.
Similar advantages are present, when using the EASI-Plasma for nano-coating. By making the nano-coated layer only 5-50 nm thick, the EASI-Plasma brings down the cost per m2 and creates possibilities to produce new innovative thinner films.
All in all there is a great potential for saving resources and creating new surface abilities by employing EASI-Plasma.
By from -
By from -
