Newly Arrival Carbon Fiber Packing Impregnated with PTFE to Israel Manufacturer
Newly Arrival Carbon Fiber Packing Impregnated with PTFE to Israel Manufacturer Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
10Mpa |
25Mpa |
Shaft Speed |
15m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
Newly Arrival Carbon Fiber Packing Impregnated with PTFE to Israel Manufacturer, The product will supply to all over the world, such as: , , ,
The aim of tightening a compression joint is to create a gas tight joint without compressing the olive too tight on the pipe by over tightening the nut as this will restrict flow through the pipe as the pipe will have been made internally smaller.
GAS IT and FES Autogas Ltd do not accept any liability from users following this video or information we provide.
We highly recommend getting a GAS IT Trained Dealer or Qualified Gas engineer to check your installation and fitment of GAS IT parts prior to filling and using it with LPG/ Autogas.
By from -
By from -