factory Outlets for PTFE Filament Braided Packing for Karachi Factory
factory Outlets for PTFE Filament Braided Packing for Karachi Factory Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
15Mpa |
25Mpa |
Shaft Speed |
12m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
factory Outlets for PTFE Filament Braided Packing for Karachi Factory, The product will supply to all over the world, such as: , , ,
I am just finishing installing the water pump in my friends 2010 Yamaha R1. It was leaking water out of the weap hole they built in them that leaks from the middle of the oil pan if you can believe that. Its just a two piece oil seal in the water pump that goes bad just behind the impeller. Ill add the Yamaha Part numbers later when I have more time as well as add the rest of the videos of the removal and earlier install
By from -
By from -