Top Suppliers Expanded PTFE Tape for Germany Manufacturers

Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.

Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.

Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.

l Easy use and replacement

l Wide service scope.

Technical Data Sheet

Regular Size

Application Area

It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.

The estimation for the high quality compressor designed for homes (Carette 4500PSI Air compressor）

Advantages:
1. Save energy : The power of this high pressure air compressor is only 1100W (the voltage 110V- the current 12A), while the power of others in the market is basically more than 1800-2200W.
2. Durable: You can make it work continuously, it is designed without piston rings, it is not the common PTFE ring or O-ring, and the repair time is up to 2000 hours or more, avoiding the annoyance of frequently repairing and frequently replacing the piston rings.
3. Look beautiful: Its inner has the cooling system, you need not add a large barrel in its outer to cool water.
4. Convenient: The structure of this compressor of us is compact, it integrates water cooling, pressure automatic shutdown, temperature control, current overload together, when any part has something wrong, it will immediately shut down, its advanced strengths are not a little bit.
5. Clean: It is in accordance with the breathing air standard -DINEN12021. Ensure you to get the pure air able to breathe.

1. The oil water separation system: A long cooling pipe is fully cooled to form a dew point. The gas outlet is set in the relative higher position.It is beneficial to collect the condensed water through the middle filter
2. Air filter: with submersible level filters, through the high-density wool, activated carbon, molecular sieve, alumina, ( it is not used for diving and can be put into the molecular sieve, it is rebuilt after adsorption saturation. )
3. Power transmission: through the V belt to drive the compression host, make the motor and the compression machine separate, enhance the heat dissipation effect.
4. Low voltage starting technology: The place where the 110V city electricity can be found can all use it basically, which is perfect in protecting the family circuit.
5. Self stop alarm function: with an excellent containing oil quake-proof pressure gauge, very accurate and durable. Able to stop perfectly.
6. Noise control: It has only 70DB, 20 times lower than the direct air compressor, it is very quiet when the family use it, because it has only 1000 rpm.
7. Security: It has the security of the automatic shutdown, the pressure control system works properly, when it fails, the overpressure exhaust valve can continue to exhaust.

The machine is equipped with a temperature control sensor, when the machine exceeds the  specified amount, the machine will automatically stop.

The air compressor is designed specially for home users , after a number of safety testing, the machine can be unattended, because its operating temperature is very low, and its power is very small.
We won’t just say how the machine is durable to use, and we will take out the real test data.

About 9 hours of run in time on 5PSI.

Race spec full rebuild.

Engine mods only are:
HEAVILY Ported & Polished intake and exhaust runners (Flow tested and Port matched)

130lb Valve Springs

Replaced retainers, locks and seals

Valve seats cut

Full custom Cam (Total .562″ Intake, .593″ Exhaust)

Polished Alloy Valve Covers

1.7:1 Alloy Yella Terra Roller Rockers and Pushrods (very quite)

Rollmaster Double Row Timing Chain

OE-R Lifters

CUSTOM Cometic MLS Head Gaskets (Suited to 30PSI)

Acid Bathed and Ultrasonic cleaned block

Cryogenically hardened crank (by cryogen.com.au, very effective hardening process)

Fully balanced to 0.5 gram

ARP Head studs, ARP Main studs, ARP Big end bolts

ALL gaskets replaced with Factory standard or above

Balance shaft removed, dilled tapped oil feed

Cam, main and rod bearings (ALL Clevite, ALL TEFLON COATED)

JE Ceramic Coated and Forged Pistons

Forged Powdered Connecting Rods

Powerbond 5% overdrive harmonic balancer

Drilled main bearing oil feeds

Extensive Cooling and Oil Feed modifications

Machined oil pump cover

Casting smoothed oil pump and filter runners

High flow K&N oil filter

ALL Surfaces decked, Bored and Honed .020″ over

Cryogenically Hardened Block, Machine Rehoned after Hardening.

New Custom oil pump gears (hardened to increase longevity)

Custom Oil Pickup Tube

Fully Rebuilt and Recondition Supercharger

Custom Machined T6 Snout (YT lookalike) and Shaved to suit boost

Heavily ported/polished supercharger inlet and out

Inlet and outlet + port matched to heads LIM + Flow tested

Ported/Polished U-Bend

69.5mm Throttle Body

Custom externally vented PCV Breather system through supercharger