Customized Supplier for Spiral Wound Gasket-CGI to Australia Manufacturers
Customized Supplier for Spiral Wound Gasket-CGI to Australia Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
A Look at the Molded Gasket
Customized Supplier for Spiral Wound Gasket-CGI to Australia Manufacturers, The product will supply to all over the world, such as: , , ,
Applications
The stick bag is a popular international packaging shape. It is also called pre-shaped bags, expansion bags. It is a novel form of packaging, diverse modeling, reliable measurement, seal firm, easy to use, and low cost packaging materials, etc.
It is widely used in dairy products such as milk, yogurt, lactic acid drinks, Japanese tofu, soy sauce, cooking oil, drinks, mineral water, cleaning supplies, alcohol, etc.
Features
It adopts 304 stainless steel, and PLC system control.
Chinese and English man-machine interface, Visualization operation
It adopts pressurized filling in airless. And it can avoid secondary pollution.
It is automatic entire process by PLC control system, such as filling, sealing, dropping bags, etc.
Unique filling nozzles design, no drip filling.
Unique sealing part, seal firm bag and avoid squeeze hand.
Main configuration
SUS304 stainless steel
WEINVIEW touch screen, MITSUBISHI PLC system, Other CHINT electrical equipment.
AIRTAC pneumatic components
Food – grade silicone tube
Selections help for plastic bag machine
Filling material viscosity
Standards: adopting sanitary centrifugal pump, mainly applied to low concentration liquid.
Viscous-type: adopting sanitary pneumatic forced pump, mainly applied to large viscosity liquid.
Bag material
Standards: BOPP laminated LDPE.
Special: PE or Nylon. It need add Teflon material in the sealed parts.
Filling accuracy ±1%
By from -
By from -
