12 Years Factory wholesale Expanded PTFE Tape to Brasilia Factory
12 Years Factory wholesale Expanded PTFE Tape to Brasilia Factory Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
No.
|
Project |
Technical Indexes |
1 |
PH Range |
0-14 |
2 |
Density |
0.7-0.8g/cm3 |
3 |
Temperature resistance |
-260-+260℃ |
4 |
High pressure resistance |
20~25Mpa |
5 |
Elongation |
20~30% |
6 |
Tensile strength |
30~35Mpa |
Regular Size
NO. |
SIZE |
NO. |
SIZE |
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:
Related Product Guide:
O-Ring Sizes for Industrial Applications
Comparison of O-Ring Materials
12 Years Factory wholesale Expanded PTFE Tape to Brasilia Factory, The product will supply to all over the world, such as: , , ,
Carlisle is the trusted provider of energy saving construction material solutions. With it’s HVAC division and specifically the Hardcast Spray Seal sprayable duct sealant the bar has been raised for both building and contractor installation efficiency. This product is “revolutionizing the way we seal and test the ductwork” Mark Spiezio, Mid Atllantic Mechanical. Carlisle also offers the only proven, award winning solution and has the industries only issued warranty for this type of solution. The trusted provider of these products has now backed it with a 5 year warranty. Building efficiency is dependent on air tight duct work. Contractors using Spray Seal are seeing close to zero CFM leakage in the duct sections. System efficiency can be improved up to 30% with this product. Spray Seal also allows the fastest and most cost effective method of sealing for the contractor. This efficiency encourages full testing of the duct work which in turns helps to insure air tight ductwork. By using Carlisle HVAC Hardcast Spray Seal a building owner can be assured that their investment in more efficient equipment and better system controls and monitoring actually can provide what has been promised. Carlisle HVAC is part of the NYSE traded Carlisle Companies (CSL.)
By from -
By from -