Factory supplied Serrated Gasket to belarus Factories
Factory supplied Serrated Gasket to belarus Factories Detail:
1.Structure
Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.
2.Characteristic
Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.
3.Gasket Typ
Basic Type With outer Ring
4. Working Environment
Working Temperature：~650℃
Working Pressure：6.4-16.0MP
Min. Pre-tightening：y=70MPa
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials
Factory supplied Serrated Gasket to belarus Factories, The product will supply to all over the world, such as: , , ,
The 3 X Factor – Three Exclusive Features
V-Seal
Rotex V-SealSelf Energized: Exclusive self energized double lip seal design for superior dynamic sealing. V-Seal operates over a broad range of instrument air pressures. Lower friction and less hysteresis for control applications.
Wear Compensating: V-Seals’ wear compensation feature eliminates the “set” taken by traditional O-rings. Greater temperature range and chemical resistance than O-rings. Actuator seal selection made simple!
Seamless Bearings
Rotex Seamless BearingTop Pinion Bearing: Rotex Infinity has a large solid top bearing to center and align the pinion for years of trouble free service and performance. Traditional “strip” bearings or O-rings offer less surface area and load capacity, reducing the overall life of the actuator.
Seamless Piston Head Bearings: Bearings are large one piece construction to support and guide the pistons under maximum load conditions. Bearings are molded directly to the piston, then machined concentric to the piston, centering the piston more precisely than strip bearings or O-rings possibly could.
Rack Engagement Bearings
Rotex Rack Engagement BearingsCenter Bore Sleeve: Provides the largest single piece bearings surface possible for complete piston rack support.
Internal Rack Guides: Durable guide blocks optimize rack teeth engagement for a lifetime of actuator cycles.
By from -
By from -
