Free sample for Serrated Gasket for kazakhstan Factories
Free sample for Serrated Gasket for kazakhstan Factories Detail:
1.Structure
Serrated Gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The Serrated Gasket with inner and outer rings or composite gasket attached with flexible graphite or Teflon sheet are available depending on the working location and requirement.
2.Characteristic
Serrated Gasket is an idea gasket used in low pre-tightening, the soft sealing surface avoid metal to metal touch, can be combined reliably and closely, protect flange not to be damaged. This kind of gasket is suitable to high pressure and high temperature location. Strong corrosion resistance, stable and reliable sealing function.
3.Gasket Typ
Basic Type With outer Ring
4. Working Environment
Working Temperature：~650℃
Working Pressure：6.4-16.0MP
Min. Pre-tightening：y=70MPa
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
O-Ring Sizes for Industrial Applications
Free sample for Serrated Gasket for kazakhstan Factories, The product will supply to all over the world, such as: , , ,
CM, CME (MG, MGE 71, 80, 90, 100 and 132)
Table of contents:
Dismantling:
00:00 Removing the motor flange
01:11 Removing the diverting disc, o-ring and bearing cover plate
01:33 Removing fan cover, fan and the seal ring
02:24 Removing the rotor
Assembly:
02:55 Fitting the rotor
03:09 Fitting fan cover, fan and the seal ring
04:38 Fitting the diverting disc, o-ring and bearing cover plate
04:58 Fitting the motor flange
Recorded: July 2009
For more information please visit:
https://www.grundfos.com/service-support.html
By from -
By from -
