Short Lead Time for PTFE Gasket Wholesale to Slovakia
Short Lead Time for PTFE Gasket Wholesale to Slovakia Detail:
PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.
Technical Data Sheet
| Property | Unit | Result |
| Density | g/cm3 | 2.18 |
| Elongation at Break | % | 200~450 |
| Tensile Strength | Mpa | 14~18 |
| Bending Strength | Mpa | No Break |
| Pressure Resistance | Mpa | 24 |
| Tensile Modulus | Mpa | 393 |
| Bending Modulus | Mpa | 490~586 |
| Working Temperature
(20000 hr, highest) |
℃ |
260 |
Application Area
As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Short Lead Time for PTFE Gasket Wholesale to Slovakia, The product will supply to all over the world, such as: , , ,
The 3 X Factor – Three Exclusive Features
V-Seal
Rotex V-SealSelf Energized: Exclusive self energized double lip seal design for superior dynamic sealing. V-Seal operates over a broad range of instrument air pressures. Lower friction and less hysteresis for control applications.
Wear Compensating: V-Seals’ wear compensation feature eliminates the “set” taken by traditional O-rings. Greater temperature range and chemical resistance than O-rings. Actuator seal selection made simple!
Seamless Bearings
Rotex Seamless BearingTop Pinion Bearing: Rotex Infinity has a large solid top bearing to center and align the pinion for years of trouble free service and performance. Traditional “strip” bearings or O-rings offer less surface area and load capacity, reducing the overall life of the actuator.
Seamless Piston Head Bearings: Bearings are large one piece construction to support and guide the pistons under maximum load conditions. Bearings are molded directly to the piston, then machined concentric to the piston, centering the piston more precisely than strip bearings or O-rings possibly could.
Rack Engagement Bearings
Rotex Rack Engagement BearingsCenter Bore Sleeve: Provides the largest single piece bearings surface possible for complete piston rack support.
Internal Rack Guides: Durable guide blocks optimize rack teeth engagement for a lifetime of actuator cycles.
By from -
By from -
