Low MOQ for PTFE Filament Braided Packing for Manufacturers
Low MOQ for PTFE Filament Braided Packing for Manufacturers Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
15Mpa |
25Mpa |
Shaft Speed |
12m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
0~14 |
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials
Low MOQ for PTFE Filament Braided Packing for Manufacturers, The product will supply to all over the world, such as: , , ,
Ring joint gaskets
A&M HW100 fill valve leak repair.
If you have a leaky cylinder you should contact A&M, who should repair it under warranty.
If you find your A&M cylinder is leaking from the fill port then you can either replace the O ring on the little plunger inside the valve or you can convert it to a simple M10* countersunk bolt with an O ring seal. The O rings and bolts can be bought on eBay or your local DIY store.
*It has come to my attention that A&M use a number of different sizes of bolts in their fill valves so you will need to measure yours to make sure you are buying the correct size bolt and O ring.
www.xtxair.com
If you have a leaky cylinder you should contact A&M, who should repair it under warranty.
By from -
By from -