Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:

Related Product Guide:
O-Ring Sizes for Industrial Applications
A Look at the Molded Gasket
Good Quality for Carbon Fiber Packing Impregnated with PTFE to Estonia Factory, The product will supply to all over the world, such as: , , ,
SpeedFlex® Track Top Gasket (TTG) is an intumescent cover for the ceiling track providing fire, smoke, and acoustical ratings for head-of-wall joints between gypsum walls and concrete floor slabs. TTG is compatible with all ceiling track and provides an economical method of providing the required seal in rated and non-rated wall construction. Installed on the track prior to installation, the wall is effectively sealed against fire, smoke, and sound transmission during the construction process, thereby providing cost savings. TTG allows up to 100% movement. The red color is easy to identify and easy to inspect, and it is not susceptible to cracking, sagging, or dripping.
For more information visit www.stifirestop.com






