Factory Cheap Hot PTFE Gasket for Orlando Factory

Short Description:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material. Technical Data Sheet Property Unit Result Density g/cm3 2.18 Elongation at Break % 200~450 Tensile Strength Mpa 14~18 Bending Strength Mpa No Break Pressure Resistance Mpa 24 Tensile Modulus Mpa 393 Bending Modulus ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Factory Cheap Hot PTFE Gasket for Orlando Factory Detail:

PTFE gasket is manufactured by molding method with PTFE granular resin. Compared with other plastic, PTFE has a superior properties against chemicals and temperature. Because of such excellent properties, PTFE gasket has a wide application as a sealing material.

Technical Data Sheet

Property Unit Result
Density g/cm3 2.18
Elongation at Break % 200~450
Tensile Strength Mpa 14~18
Bending Strength Mpa No Break
Pressure Resistance Mpa 24
Tensile Modulus Mpa 393
Bending Modulus Mpa 490~586
Working Temperature

(20000 hr, highest)

260

Application Area

As a sealing material, PTFE gaskets can be used in flange joint of various equipments and pipes in chemical industry, food producing industry, medicine industry and so on. It can bear the most bitter chemical medium, and has good anti-creeping performance. The unloaded operating temperature range is -180~+260℃.


Product detail pictures:

Factory Cheap Hot
 PTFE Gasket for Orlando Factory detail pictures


Related Product Guide:
O-Ring Sizes for Industrial Applications
What Is A PTFE Ring Gasket?

Factory Cheap Hot PTFE Gasket for Orlando Factory, The product will supply to all over the world, such as: , , ,


  • Visit https://parts.rheem.com to buy manufacturer authorized parts for Rheem, Ruud, Richmond, Marathon, Eclipse, Vanguard, Hotpoint and General Electric (GE) water heaters. We also offer many universal parts designed to fit most other brands of water heaters.

    Changing the anode rod every four years is a great way to extend the life of your water heater. The anode rod is a special metal component that’s meant to slowly dissolve so that the tank itself doesn’t corrode. When the anode rod is depleted, it no longer offers corrosion protection for the tank. To avoid tank damage, it’s best to replace the rod before that happens.

    We offer anodes made from magnesium and aluminum, available in various lengths. Aluminum rods are available where sulfur odor or “rotten eggs smell” is a problem. Flexible rods are available where overhead space is tight for installation.

    This video shows detailed step-by-step procedure for how to replace an anode rod on a gas or electric hot water heater.

    Tools you’ll need
    A ratchet wrench
    A 1 1/16-inch socket
    A 24” cheater bar or pipe
    A Flat Blade Screwdriver
    Teflon tape
    A 2-gallon bucket
    Hack saw

    WARNING: For your safety, be sure to carefully read and understand the manufacturer’s Use and Care Manual, in its entirety, prior to operating, repairing or adjusting the water heater. Failure to do so may result in fire or explosion, electric shock, property damage, personal injury, or loss of life. If you do not understand these instruction or any terms within them, please contact a qualified service professional. Prior to starting any repairs or service on your water heater, please thoroughly read the Use and Care Manual provided with your water heater. If at any time you are unsure or uncomfortable about the suggested repair or service discussed herein, stop any activity and immediately contact a licensed plumber.


    5 Stars By from -

    5 Stars By from -

    Related Products