Fast delivery for PTFE Graphite Packing with Aramid Corner for Senegal Factories
Fast delivery for PTFE Graphite Packing with Aramid Corner for Senegal Factories Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials
Fast delivery for PTFE Graphite Packing with Aramid Corner for Senegal Factories, The product will supply to all over the world, such as: , , ,
***important***:
1. pay attention at min 7.43-7.59 for the injector sleeves holes aligning.
2. on the editing I forgot an important step, min 10:40 to 11:12 should be as here: https://www.youtube.com/watch?v=_f5L8VdXHEc
(thanks to Eithan H from itocuk.co.uk for those remarks)
advise to see Cliff’s videos on the subject
By from -
By from -
