Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers
Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
Useful Tips For Installing The Teflon Envelope Gasket
Reliable Supplier PTFE Graphite Packing with Aramid Corner to Qatar Importers, The product will supply to all over the world, such as: , , ,
Custom Rolling machine can roll 20 gauge sheet metal to 50mm to 150mm diameter cylinders. This is 2 roller uses 1 large rubber roller pressed against a small mandrel. Benefits of this rolling technique are first, perfectly cylindrical finished product with no flat section near the edge unlike the conventional 3 roller machine. Removal of finished cylinder is easy because one side of the roller is automatically opens after the rolling cycle is finished.
Machine can be designed to roll tapered cylinders like motorcycle exhaust pipes, funnels and sheet metal pipe adapters.
By from -
By from -
